WELDING AUTOMATIC MACHINES

The automatic machine serves for welding of seats into the bodies of armatures. Seats are usually inserted obliquely into the bodies. Welding head follows automatically welding joint by left-right traversing.

The automatic machine serves for welding of seats into the bodies of armatures and for direct weld surfacing of seats within the bodies of armatures. Seats are usually inserted obliquely into the bodies. Welding head follows automatically welding joint by left-right or upside-down traversing.

The automatic machine serves for welding of seats into the bodies of armatures. Seats are usually inserted obliquely into the bodies. Welding head follows automatically welding joint by left-right traversing.

The SA 600 automatic welding machine consists of several modules, a three-axis linear travel mounted on two columns, a roller positioner located on the rails in the floor and a rotary positioner. The device makes it possible to perform linear or rotary welds of parts of containers mounted on a roller positioner or smaller parts mounted in a tilting positioner. Parameter settings are made from the control panel. The welding head is mounted on a support driven by a servomotor and has the option of setting the exact position using a manual support. The welding source stands alone behind the level of the supporting columns. 
The machine can be equiped by various welding proceses  - for exemple MIG, TIG, UP.

Mobile welding unit which serves for clamping to flange or to pipes, or to welding pipes to the side of container. Control mechanism is placed in a separated box which is connected with the unit by wires.

The automatic machine serves for rotary welding of automotive industry parts.

The automatic machine serves for rotary welding of automotive industry parts.

The automatic machine serves for rotary welding of small pieces. The automate is equipped with rotary table. There are 2 jigs on the table. During the welding process, the parts are welded in the first jig and manually changed in the second jig at the same time.

Welding automatic machine for welding of rotors. The machine is equiped by two welding places with rotary table. Delivered including of jigs and clamps.

Automatic machine is suitable for welding of parts and pipes. Parts are fasten in jigs. SA 719 is equiped by two welding places on rotary table.

The automatic machine serves for welding piles of transformer sheet (cores of choking coils and transformers).

Welding machine SA 727 with rotating table with two working-welding places.
Welding methode TIG/WIG
Welding of rotating parts

The automatic machine serves for a circumferential welding of rotary and non-rotary parts (ellipse, rectangle with corner radius, etc.).

The automatic machine serves for welding of rotary parts.

The welding automate is used for welding and weld surfacing of armatures parts by a MIG/MAG method. The tilt positioner enables weld surfacing from face or it can be used for clamping of the long parts which support the pair of the supporting rollers on the opposite side.

Welding atomated machine for welding of aluminium tubes.
Aluminium welded construction is possible to straighten on machine RS 400 and RS 300.

Welding machine for circumference welds. Methode TIG.

The automatic machine serves for welding of corners from curled sheet metal.

The automatic machine serves for linear welding of tubes from curled sheet metal.

The automatic machine is produced for production of large containers. It has  solid frame, copper water cooling slat, control and operating is simple and safe.

The automatic machine is used for production of large containers. The large casings of containers are welded on the right side of a supporting strip and the smaller ones on the left side.

The welding line SL 800 serves for welding of large armatures parts by under the fluxing agent method or MIG/MAG method. Long parts are clamped in the positioner and the welding unit with a positioning system of the torch moves on rails alongside.

The automatic machine serves for welding nipples on chamber. Pivot arm with positioning system enables welding on both sides of railway and makes the manipulation with chamber easier by usage of crane. It serves in variations:
a) welding by TIG method with additional welding wire for roots welding
b) welding under the fluxing agent for filling
c) MIG welding for filling

welding machine TIG - FM 18